cell-2.jpg

You are here: Home > Search Keywords > Search Results
 
 
Aseptic Processing Isolators (Presentation) by Richard L. Friedman, MS June 7, 2001
 
The highlights of this presentation by a leading FDA-CDER authority on aseptic processing isolator systems include basic design and validation approaches as well as feedback by FDA inspectors on various isolator applications during pre-approval inspections.
 
Environmental Qualification and Monitoring within an Isolated Vaccine Filling Line (Presentation) by Les Edwards, MSE June 13-14, 2001
 
This section discussed the environmental qualification data and established action/alert limits for a vaccine filling system housed within an isolator. A comparison is made to conventional clean room monitoring techniques and limits.
 
Current Trends in Controlled Environments (Presentation) by James R. Rickloff, MS October 29,2000
 
An overview of conventional aseptic processing is presented and it addresses the key issues that corporate decision makers are faced with when implementing isolation technology, such as regulatory requirements and equipment validation focus areas.
 
Implementing the Key Elements of Validating a Production Isolator System (Presentation) by Les Edwards, MSE January 24-25, 2002
 
An overview of the key aspects of validating a production isolator system is reviewed with an emphasis on relating design documentation to validation plans and protocols.
 
Practical Validation Strategies for Isolated Sterility Testing Labs - Part I (Presentation) by Les Edwards, MSE June 13-14, 2002
 
This workshop thoroughly reviewed the overall design process and equipment qualification methodology for isolator systems utilizing gaseous decontamination methods. Key learning objectives included determining your capacity requirements, developing a validation master plan, facility classification requirements, and qualifying your isolators and related process equipment.
 
H2O2 Gas Decontamination Cycle Comparisons Between Rigid and Flexible Wall Isolators (Presentation) by Les Edwards, MSE October 3, 2002
 
This presentation provides an overview on the decontamination cycle and regulatory expectations for the process. Past flexible wall data and its' implications are reviewed and how new trends in validation techniques are implemented to reduce them. The benefits of rigid wall isolator construction are also discussed.
 
Microbiological Monitoring in Isolators (Presentation) by James R. Rickloff, M.S. September 18, 2002
 
This presentation reviews the principles of microbial monitoring in isolators, current US and European regulatory requirements for monitoring, and the means to achieve and maintain a germ free environment. The current means to monitor the air and surfaces in isolators is also touched upon.
 
Principles of Microbiological Monitoring in Isolators (Presentation) by Les Edwards, MSE July 2-3, 2003
 
This session discusses approaches to environment monitoring in isolator systems, including comparisons to conventional cleanroom aseptic process monitoring, measurement methods, alert and action limits, regulatory expectations, and related validation requirements.
 

back

 

 

Two locations to better serve clients worldwide.
 

USA Europe
150 Iowa Lane
Cary, NC  27511-4496
(919) 469-8876
(919) 469-4665 Fax
2 Avenue de Vignate
38610 Gieres, France
+33 4 76 63 48 74
+33 4 76 63 48 75 Fax

Brought to you by Advanced Barrier Concepts, Inc.

©2017 Advanced Barrier Concepts, Inc. All rights reserved.
Site Maintained By:
Bayfront Web Design

Administration